Bentonite mat, 3.3~5.3KG

Bentonite mat---Environment-preservation; Installing facilitately;Installing on the wet foundation directly;Self-repair property

     Bentonite mat---Geosynthetic Clay Liners are high performance needle punched environmental reinforced composites which combine two durable geotextile outer layers with a uniform core of natural sodium bentonite clay to form a hydraulic barrier. Fibers from the non-woven geotextile are needle punched through the layer of bentonite and incorporated into the other geotextile.

     When hydrated under a confining load, the bentonite swells to form a low permeability clay layer with the equivalent hydraulic protection of several feet of compacted clay. The excellent properties make the products ideal for many projects.

Installation Methods:

Disposal of subgrades:1.the subgrades must be tamped before paving the GCLs, the surface should be smooth. And itshould not have the obvious hollow space.2.the surface should be dry.3.the minimum angle of land surface exposed to the sun should be more than 30cm.4.the construction of GCLs should be begin until checking out the foundation Preparation before paving the GCLs:1.drawing the GCLs paving order 2.examining the GCLs appearance quality 3.the construction of GCLs should be processed under the weather with no rain and snowGCLs paving :1.when paving the GCLs, it can use the machine and also the manpower.2.paving the GCLs according to the stated order and way. 3.paving the GCLs, seaming overlapping between mat and mat should be staggered. 4.there should not be sand and soil, hydrocele and so on impurity, to avoid affecting on theoverlappingquality.5.to avoid the GCLs gliding, had best to fix it with nails when installing in vertical andbevel. Such asdrawing 6.both sides of the GCLs are geotextile and woven geotextile, when paving, the geotextileshould be nextto the water 7.when paving, examine the GCLs appearance at any moment Backfill :1.GCLs paved must be backfilled on the day. 2.the sand or the sifted soil is the best choice, and the soil should not have impurity withmore than10mm. 3.the soil must be tamped every backfilling 50cm, and the degree of density should be more than85%. 4.pay attention to the GCLs when tamping, it can not be damaged.5.when backfilling in the planar surface, the thickness should be 30cm at least.

Technical Specification:

MATERIAL PROPERTY	TEST METHOD	REQUIRE VALUES
Bentonite Swell Index	ASTM D 5890	24ml/2g min
Hydrous Rate(%)	ASTM D 4643	12 max
Bentonite Fluid Loss	ASTM D 5891	18ml max
Tensile Strength	ASTM D 4632	10.5KN min
Peel Strength	ASTM D 4632	65.8N min
Bentonite Mass/sqm	ASTM D 5084	5kg/ sqm min
GCLs Permeability	ASTM D 5887	5×10-9 cm/sec max

Bentonite mat, 3.3~5.3KG